|
|
Many of the products Streicher's offers requires exact sizing information. For
your safety and comfort it's important to get the correct fit from the products
you wear and use while on duty. Manufacturers will often differ slightly in
their sizes, but there are some general rules and guidelines to uniform and
equipment fitting. Please read below to view our sizing guidelines. This will help you fit all your equipment like
shirts, gloves and pants.
Should the items you order not fit correcttly, they can be exchanged within 30 days to Streicher's. Read below to learn how to get an accureate size the first time.
|
| Gloves |
Measure around the hand at the fullest part
(excluding thumb). If right-handed, use right hand,
and vice versa. The number of inches equals glove
size. Different manufactures will vary slightly, but below is an esitmate for most glove manufacturers.
Small- 7.5"-8"
Medium- 8.5"-9"
Large- 9.5"-10"
X-Large- 10.5"-11"
XX-Large- 11.5"-12" |
 |
| Chest/Bust |
Using a cloth tape, measure around the fullest part
of chest, keeping tape up under arms and around
shoulder blades Different manufactures will vary slightly, but below is an esitmate for most shirt manufacturers.
Small- 30"-32"
Medium- 34"-36"
Large- 38"-40"
X-Large- 42"-44"
XX-Large- 46"-48" |
| Neck |
Measure around the base of neck allowing for a
comfortable fit, or measure a shirt collar that fits you
well. Lay the collar flat and measure from the
center collar button to the far end of the button hole.
The number of inches equals your size. |
| Sleeve |
Using a cloth tape, measure from the center of the
collar (in the back), across the shoulder and down the
sleeve. The number of inches equals your size. |
| Waist |
Using a cloth tape, measure around waist, over body (not over shirt or slacks) at the height you normally wear your slacks. Keep one finger between the tape and body. The number of inches equals your size. Different manufactures will vary slightly, but below is an esitmate for most pant manufacturers.
X-Small- 24"-26"
Small- 28"-30"
Medium- 32"-34"
Large- 36"-38"
X-Large- 40"-42"
XX-Large- 44"-46" |
| Belts |
Order your belts 2 larger than your actual waist
size. If you are between even sizes, order the next
larger size. |
| Inseam |
Using a cloth tape, take a pair of your best fitting
uniform pants (not jeans). Measure from the crotch
seam to the bottom of pants along the inside seam (to
the nearest inch). |
| Outseam |
Using a cloth tape, take a pair of your best fitting
uniform pants (not jeans). Along the outside of leg,
measure from the top of the pants to the bottom of the
pants along the seam/stitching (to the nearest inch). |
|
 |
| Body Armor |
| Click here to download the full sizing form |
| 1. |
Take a standing waist measurement. Measure across the officer's waist at its widest point. Generally, this will be either approximately two inches above the duty belt or along the belly-button line. Using the chart, determine the panel size needed and place that size on the downloadable sizing form in the "FrontSample Size" box and the "Back Sample Size" box. (Ex: M, L or XL) If the waist measurement falls in between two sizes, we recommend you select the larger size to ensure the panel's edges touch or overlap. |
 |
| 2. |
Take a front seated measurement. Making sure the officer is in a relaxed seated
position, measure from the clavicle notch to a point above the duty belt.
Ensure that the front panels edge WILL NOT touch the duty belt or its
accessories while seated. Using the chart, determine the front-seated panel
length needed and place that size on the downloadable sizing form in the "Front
Seated Measurement" box. (Ex: R, L or X) |
 |
| 3. |
Take a back-standing measurement. Using the natural shoulder line, select a
point at the middle of the back. Measure from that location to a point above
the duty belt. Ensure that the back panels' edge WILL NOT touch the duty
belt or its accessories while standing. Using the chart, determine the back
standing panel length needed and place that size on the downloadable sizing
form in the "Back Standing Measurement" box. (Ex: R or L or X-1) |
 |
| 4. |
Using the previous waist measurement, use the chart to determine girth width
needed, and place that size on the downloadable sizing form in the "Side
Standing Measurement" box. If the waist measurement falls in between two sizes,
we recommend you select the larger size to ensure the panels' edges touch or
overlap. (Ex: R or L or X) |
 |
| 5. |
Place the "Front and Back Sample Size" the "Front-Seated Measurement" the "Back
Standing Measurement" and the "Side Standing Measurement" that you recorded on
the downloadable sizing form in the "Actual Size box". (Ex: LR / LRR) |
 |
 |
 |
| Individuals whose size exceeds the "X" designation can be properly
sized by adding needed one-inch increments (X+1, X+2, etc.) Individuals whose
size falls below the "S" designation can be properly sized by subtracting a
one-inch increment only (S-1) Females please include cup size. |
| Click here to
download the full sizing form |
|
|
|
|